Jungle Val, also known as Vallisneria americana, is a hardy plant that many beginners and experienced hobbyists like to keep in their aquariums. A big part of that attraction is that the jungle wal is pretty darn easy to care for and grow – as long as you follow the right jungle wal care guide.
He is not very picky and does well in many different environments. Jungle Val is also one of the first plants used in fish farming, so this plant has a long history in the ribbon grass family.
If you have doubts about this plant and are not sure if you want to use it in your aquarium, check out the care and recommendations below!
Jungle Val Care: A short information
Jungle Val is a long, fibrous grass that resembles seaweed due to its bright green, ribbon-like leaves. The plant also grows quite tall, making it an ideal background plant for your tank. It is also an ideal choice for many aquariums that have shy animals that need natural foliage to hide so they can feel safe.
This aquatic plant comes in a wide variety of species, but Vallisneria americano is the most commonly found in the aquarium market. The plant can be found in America and Asia, as well as in Australia. Go figure it out!
Author’s note: The plant grows naturally in shallow, slow moving bodies of water such as streams, ponds and lakes. The water is usually shallower than ten feet, but you can sometimes find the plant in coves and coves with lower salinity (like brackish water).
Jungle Val grows up to six feet tall in these wild conditions. The plant grows quickly, is easy to care for and is safe for fish.
|Scientific name:||Vallisneria american “Gigantea”|
|Other names:||ribbon grass, sea grass and water celery|
|Lighting needs:||Bright lighting is best|
|pH level:||6.0-9.0 pH and moderately hard to very hard|
|Care level:||Very simple|
|Minimum tank size:||29 gallons|
|Maximum plant size:||6 feet|
About Jungle Val
This beautiful aquatic plant goes by several names, making it hard to find in a store. For example, it can be called Eelgrass, Water Celery, Tape Grass or Jungle Val.
Whatever name you find it under, you’ll find it’s a great background plant, perfect for beginners.
Jungle Val is a strong plant that can withstand a wide range of water parameters. It has preferred conditions (we’ll talk about them later), but for the most part they’re pretty easy to take care of, primarily because of that.]
plant in your aquarium will not reach a total of 6 feet in height unless, of course, you keep it in a huge aquarium like a public aquarium.
However, it will increase and rise to the surface of the water. There, at this height, she will remain. However, his leaves will continue to grow – they will float on the surface of the water.
Prefers an aquatic lifestyle (with or without Steve Zissou), so you will not meet him on land.
Jungle Val does best on gravel or sand (or a combination), although it prefers sand as it is closer to what grows naturally in the wild.
Top tip: Surprisingly, the plant has an extensive root system, which is something you probably don’t expect from such a plant.
Jungle Val Uses and Benefits in Aquarium
Jungle Val is an excellent choice for those who want to plant live plants in their aquarium. This plant is known for its vibrant color which can enhance the look of your aquarium.
Even though this plant does not have the color of some plants, it still offers a unique look that catches the eye.
Jungle Val has the same look and feel as sea grass. Leaves emerge from the base and spread upward, often growing long enough to touch the top of the waterline.
So even if your aquarium has low water flow, the plant will move with the current.
There are many reasons to include live plants in your aquarium; one reason is to help improve the condition of the water. Living plants release water during the natural process of photosynthesis. This higher oxygen environment will make your home a better home for your fish.
Author’s note: Another reason to include live plants is that they can help get rid of chemicals and pollutants. For example, plants can get ammonia from water and use it as nitrogen for their growth.
Ammonia removal is very important because it is a by-product of fish waste, and if not controlled, it can kill fish. Having plants that provide low ammonia levels means your fish will live in a safe habitat.
Jungle Val adds a place for your fish and invertebrates to swim, explore and even hide inside. There are many fish that are easily stressed, and the presence of plants allows them to hide or rest.
Tank Requirements for Jungle Val
When you want to grow Jungle Val, the first thing to consider is making sure you have the right size tank. Jungle Vals is a plant that can grow tall, so having a large aquarium is ideal.
The smallest recommended tank is 20-30 gallons; anything less will mean you have little to no room for fish. Some prefer to plant it in a pond to grow it to its full size.
This plant thrives best in water that mimics its natural environment. Therefore, he prefers warm water, leaning towards alkaline on the pH side.
To be healthy, he needs to be in the light for at least eight to ten hours a day. Without this amount of light, it will not photosynthesize properly.
The best substrate for this plant is sand or gravel. These plants grow naturally in sand, but they can adapt to growing in pebbles or smaller rocks.
|Water temperature:||64 to 82 degrees Fahrenheit|
|pH levels:||from 6.0 to 9.0 (preferably slightly alkaline)|
|Hardness of water:||8 to 12dGH|
Jungle Val Basic Care and Maintenance Guide
Jungle Val is one of the easiest freshwater plants to care for. The unusual thing is that you have to do much more than just plant a plant and enjoy it.
While there is ongoing debate in the aquarist community about trimming a Jungle Val, the general consensus is that you should not trim or trim a Jungle Val.
Although some may say no problems, it is important to be careful because improper pruning will lead to the death of the plant.
Author’s note: Even careful pruning can damage the foliage and lead to leaf rot. The rotting leaves will then quickly spoil the water and then the water quality in your tank will plummet.
If a situation arises where you need to cut the Jungle Val, it’s important to make sure you use very sharp scissors. If necessary, be sure to sharpen the scissors yourself. This is because making an accurate cut will help reduce the chance of rot and infection.
This plant does not need to be trimmed often because most plants will adapt to the aquarium you put them in. However, they should only grow according to the height and volume of water inside your tank. This plant rarely reaches its full potential in the aquarium because it does not have enough space.
Common problems with Jungle Val
Jungle Val is a great beginner plant for those new to aquatic plants. It can tolerate slight changes in water, stay healthy and reproduce.
Though confused with death, melting is a normal part of Jungle Val’s life, especially after a transplant. Melting is the process by which the weaker leaves turn brown and fall off the plant.
If for some reason the fallen leaves do not fall off, you can only remove them with sharp scissors; if you use blunt scissors, worn blades will break and cause permanent damage to your plant.
Although this plant rarely needs fertilizer, if you notice prolonged thawing or if it doesn’t seem right, fertilizer can help.
If you decide to apply fertilizer, it is important to choose high quality fertilizer. When using fertilizer, all instructions must be followed; as a rule, fertilizers should be applied once a week.
One easy way to make sure everything in your tank is working is to keep the tank clean. It is very important to remove all dead leaves before they have time to decompose. Also, it’s very important to make sure your tank has a great filter to help keep the water circulating.
Whenever algae starts to form, it is important to wipe them off. Otherwise, it will start to build up and start to create problems for your plants and other aquarium inhabitants.
How to plant Jungle Val
When purchased from a store, they can usually be found in pots or naked breeding. Either way, the process of landing the Jungle Val is simple. The plant only needs to be taken out of the container it is in, and then the new plant is planted in the substrate of your aquarium.
This plant is well suited as a background plant due to its growth potential. However, it grows best in the back of the aquarium, where it has the most freedom to grow.
It is very important to make sure that the crown of the plant is above the substrate obtained during planting. The crown of a plant is its base, and if it is buried, the plant will lose its leaves and eventually die.
Jungle Val often goes through a period of melting. This is easily confused with death. During this process, the weakest leaves of the plant will fall off.
This normal process allows the plant to adjust to new conditions by removing old leaves that are not as healthy as the others. This way the plant can focus on producing fresh leaves.
Jungle Val doesn’t take long to take root. After the roots grow, caring for the plant will become easier. As long as you buy a healthy plant, you don’t have to worry about complicated planting practices, CO2 injections, or fertilizers.
Top tip: Jungle Val can quickly adapt to different water conditions. This plant can be planted and thrives in alkaline and hard water. In addition, this plant can grow in brackish water.
However, this type of water will reduce the rate of growth and the overall amount of spread.
How to propagate Jungle Val
Jungle Val is a plant that can reproduce in several ways.
When this plant is in the wild, it will produce a flower that will float. The male flowers are then released and captured by the female flowers, allowing pollination to occur. If these plants are kept in a pond and not in an aquarium, this cycle can be seen.
When this plant is kept in a freshwater aquarium, it almost always propagates by shoots alone. This plant rarely produces seeds if kept in an aquarium.
Instead, they have shoots that grow under the substrate in the aquarium and start a new plant close to the original.
After it has time to grow, you can separate this new sprout and transplant it to another place. A key sign that a plant is ready to separate is that it has developed leaves.
If you are not patient and cut it off too early, the plant will die.
Once you separate a new plant from summer, it may take about four weeks to acclimate to where it was planted. After a few weeks it will start to grow runners.
We hope you enjoyed our Jungle Val Care Guide!