Learn How to Clean Your Aquarium Fast

Blackbeard algaealso known as brush algaeis a part red algae family and grows on plants, along the edges of their leaves. It also grows on hard surfaces. Blackbeard algae removal can be difficult if you don’t know what you’re doing.

Algae got its name because of the hairy strands, somewhat reminiscent of overgrown aquamarine beard. He stubbornly clings to aquarium plantsrocks, wood, and, well, just about anything that it sticks to that is hard to remove by hand.

This unpleasant trifle became a scourge for fish farmers over the years.

BUT few fish eat this substancebut not many (Chinese algae eater and Florida flag fish), so it’s definitely not going to just “leave” in a populated pond or aquarium.

So let’s see what it is, what it does and blackbeard algae removal tips as well as how aquarists can handle it.

How to determine Blackbeard algae

Blackbeard algae has the look you might think from its name alone. When this algae starts to grow, it looks like black stubble is growing in your tank.

If you let it continue to grow in your tank, it will grow and look like your tank has grown to its full length and is blowing out a black bead.

This algae is also known by other names. It is called black brush algae or simply VVA.

Most Blackbeard algae variants occur naturally in salt water.

When Blackbeard algae infects the tank, the bristles first appear on the edges live plant leaves and then quickly cover the leaves.

Your plants will start to die because they don’t have direct access to the sun and therefore can’t photosynthesize.

Blackbeard Algae Removal: 4 Best Methods

There are several methods for getting rid of seaweed black beard.

1. Treat the tank Hydrogen peroxide

In some situations, it just isn’t practical to remove affected items from your tank, so you need to heal the entire tank instead. One way to do this is to add 10 milliliters of pure 3% hydrogen peroxide for 15 gallons aquarium water.

  1. Add the required amount to the tank
  2. Repeat once a day for 3 days, then wait.
  3. If the algae does not disappear within 14 days, repeat the procedure with a slightly higher dosage.
See also  20 Easy Live Plants for Your Aquarium That Don’t Need CO2

This method is safe for fish, shrimp and so on.

2. Regulation Phosphate (PO4) In your aquarium

When substances such as uneaten food, waste produced by fish, or dead plants are left to rot in your tank, it raises the level phosphate in the aquarium and allows the algae to not only survive but thrive in that environment.

To prevent an increase phosphate Make sure your aquarium is clean.

3. Imagine Blackbeard algae eaters

cherry shrimp eat algae

Certain types of fish and snails love to eat seaweed black beardso one option is to get rid of it in your aquarium or a pond adds some of these types of fish to your supply.

They won’t eat a ton of algae, but they will definitely eat enough to leave a dent in it if that’s not too bad, and this can help reduce the likelihood of algae reappearing in large numbers.

Some of fish species per planted tanks who love to nibble on these algae include:

The main thing to remember is that these species will not eat algae if they have nothing to eat.

Avoid overfeeding them (for their health and to reduce algae) and watch their movements to make sure they don’t become lethargic.

4. Enhance Carbon dioxide level in the aquarium

Carbon dioxide won’t directly kill seaweed black beardbut it can help to reduce its amount in your freshwater aquarium.

CO2 promotes plant growth, which reduces the nutrients that algae can leach out of the water, thereby reducing the availability for algae growth. This basically means that you are letting your plants out-grow the algae.

You can enlarge CO2 levels several ways – CO2 injectionheat treatment and liquid carbon.

General Causes of Blackbeard Algae?

One of the main ways that Blackbeard algae may begin to grow in the aquarium due to unstable or very low levels carbon dioxide.

When CO2 is unstable, plants cannot properly use nutrients from fertilizers or process light properly for photosynthesis.

The best way to solve the problem of low or unstable water levels in your aquarium. carbon dioxide is to use CO2 additives. Be sure to avoid overdosealthough.

The most common way black bear algae enters an aquarium is through algae-infested plants.

However, small, free-floating strands of algae may be carried along with your purchased fish. These threads are enough to cause an algae outbreak.

Problems with CO2

If you are looking for the root cause of a tank having uncontrolled growth Blackbeard algaelook no further than CO2 levels your tank.

If the tank is low or fluctuates CO2 levels then there is an environment ripe for growing algae. All this can also be aggravated by the fact that your aquarium is bad. water circulation.

See also  Fantail Goldfish: The right way to care for fantails

When you start fighting black bear algae, your priority should be CO2 levels to the level they should be.

The easiest way to add CO2 is to use an injectable form of CO2 that ejects it directly into water tank.

Too much light in the aquarium

Almost everyone in your aquarium loves light, including algae. Part of what makes algae such a problem is that they are very efficient at absorbing aquarium light contribute to its rapid growth.

The longer algae have access to light, the faster they will grow in your tank. If you already have grow lights, this will exacerbate the problem.

One of the effective methods of destroying algae is to deprive them of additional aquarium light. If possible, you can shorten the hours the lights are on, or even turn the lights off completely for a few days.

Does Blackbeard algae Hurt a fish?

cleaning the aquarium from algae

Bye Blackbeard algae can easily kill the plants in your tank, algae is unlikely to harm the snails, shrimp or fish you keep.

However, this does not mean that you should just relax and let the algae grow. It takes little time to cover all plants such as anubias and the surface of your tank.

Not only will your aquarium look dirty and disgusting, but the longer you wait for a solution to the problem, the more difficult it will be to get rid of algae.

If you allow me Black beard Algae spread and cover the entire tank, eventually a nutrient imbalance will occur which can cause your tank to become unsafe for your fish and can lead to sickness or death.

Does Blackbeard algae Damage plants?

Blackbeard algae will kill your plants if allowed to spread uncontrollably. While this algae does not directly kill plants with toxins or leaching from the plant, instead, the algae does by suffocating your plants to death.

If you see a stain seaweed black beard, it’s a big deal. It is important to take immediate action to correct the imbalance in your aquarium because the speck will soon grow and cover the entire plant.

When your plants are covered, they can no longer absorb light through photosynthesis. Blackbeard algae will also compete with your plants for food in water and soil, further starving your plants.

How to prevent Blackbeard algae from the formation

To stop algae problem in your fish farming world, your best course of action is to practice prevention in first place.

When this algae starts to grow in your tank, it will grow quickly and will be able to cover everything in the tank that is not moving. It will kill the plants by blocking the light and preventing the process photosynthesis from what is happening.

See also  14 Aquarium Plants That Will Grow on Wood and Rocks

Not only is this algae hard to stop and get rid of if your tank has been infested once, it’s also easier for the algae to come back again.

One way Black beard Algae can enter your tank by presenting new fish. One of the best ways to prevent Blackbeard algae from entering the aquarium to make sure you buy plants and fish from a reputable store.

Even if you trust the person you’re buying fish and plants from, it’s important to quarantine because of how easily these algae spread.

way to avoid new fish the introduction of potentially lethal fungi or algae is carried out by quarantine new fish at least two days. When placing fish in a quarantine tank, it is important to make sure you use a net to house them.

No need just dump them out of the bag because it’s unpleasant for the fish and you may be dumping water that may contain substances that degrade the quality of the water in your tank.

Blackbeard Algae Removal: Maintenance Is Key

aquarium cleaning

Be sure to spend weekly water changes also regularly to reduce the accumulation of substances that attract algae.

You should also clean substrate regularly with a vacuum, along with maintaining driftwoodlying plants and others aquascaping features removed.

Be sure to save your media filter cleaned up fine too.

Plants can be another dangerous way Blackbeard algae can be injected into your tank. When you buy new plantssoak them in vegetable prophylactically mixed with ten percent bleach solution.

Plants should be immersed in water for about two to three minutes.

Another option is to clean the plants with hydrogen peroxide bath. This chemical is less aggressive than bleach, but it can also kill bacteria, parasites, or diseases that may be on plants.


One final note: make sure you don’t take any wild plants or animals and just put them in your tank.

By removing them, you will not only damage the environment, but you can’t even imagine what wild plants and animals can have.

We hope you enjoyed our blackbeard algae removal guide!

Leave a Comment